The weight limit is 350 pounds.
The tables provide a warm water massage so they are safe for use by nearly everyone. In general, people with heart or circulatory problems; phlebitis; skin infections or contagious diseases should get their doctor’s approval prior to treatment. Ask for our “Guide to Dry Hydrotherapy” or visit the indications/contraindications page. Additionally, the tables are built to the UL and CSA safety standards and are properly registered with the United States Food and Drug Administration.
The patient lies back completely clothed on the table. Just under the surface is a mattress filled with heated water. A pump propels the warm water towards the patient through our patented hydro-jets. The pressure of the water against the patient’s body provides a kneading massage. The combination of flotation, heat and massage produces the therapeutic effects described below.
Flotation: Water is extremely buoyant. When the body is placed on the water mattress, there is minimal strain on the weight bearing joints. Few, if any muscles are required to hold the body up or in position. This helps the patient’s body relax resulting in an increased physiologic response to treatment.
Heat: Heat is evenly conducted through the skin and into the muscles and soft tissues of the body. The heat expands blood vessels, increases blood and lymphatic circulation, increases metabolism and has a sedative effect.
Massage: The pressure of the water jets knead the soft tissues. The muscle tension yields to the pressure of the water enabling the fibers to elongate and relax. This helps the blood to flow freely and toxins to be released and eliminated. The process helps stimulate the release of endorphins which help relieve pain. When the muscles relax and the pain subsides, your manual therapies are easier on the patient.
The Pro S10 half body massage model is $3,299 plus shipping and sales tax (where required).
The RejuvaWave FB100 full body massage model for 120 volt electric is $8,499 plus shipping and sales tax (where required).
The RejuvaWave FB200 full body massage model for 240 volt electric is $8,999 plus shipping and sales tax (where required).
The temperature of the water is controlled by an electronic thermostat which is adjustable from 70° to 100° Fahrenheit. Most doctors keep the temperature between 90°-100°. They just set it once and forget it. The temperature of the water takes a long time to change. Therefore, you will not be setting the temperature for each patient. You just set the thermostat and let the table maintain your chosen temperature. (The table must be plugged it at all times for the heater to operate.)
You set the length of treatment with the timer located on the front of the table. You can set it from 3 minutes to 30 minutes and the table will automatically turn off once the time has run out.
Yes. The massage intensity on the Massage Time Pro model is adjustable from 12lbs. to 17lbs. of pressure. The RejuvaWave FB100 and FB200 adjusts from 2lbs. to 20lbs. of pressure. You can create just the right sensation, from gentle and soothing to powerful and invigorating. You select the appropriate level of massage pressure by simply adjusting the control located on the front of the table.
Most doctors keep patients on the table 10-20 minutes. This can vary with each patient as you must consider their specific needs within your treatment plan.
We suggest that you review the codes in your CPT coding manual and then call the insurance companies that you will be submitting claims to for final verification of a code. Check out our insurance billing and explanation of dry hydrotherapy pages for helpful information. You can use this information to help you work with the insurance
We can’t tell you what to charge. It also varies from doctor to doctor, state to state, insurance company to insurance company. We’ve heard anything from $10.00 up to $30.00 per treatment.
Intersegmental traction tables are specifically designed to introduce motion into the spinal segments. Hydrotherapy tables do provide slight motion to the spine but their main purpose is to heat and massage the soft tissues. This being said, the warm water is much easier on the body than the hard rollers, allowing it to be used on a higher percentage of patients. Additionally, roller tables work each area of the spine only a few times during a normal treatment. Hydrotherapy tables work all 3 areas of the spine throughout each treatment. The heat and massage offered by a Sidmar hydrotherapy are far superior to anything available on a roller table. There are also many people, certainly those with scoliosis, who simply can’t use a roller table. For these people, dry hydrotherapy works very well.
Your patient’s response to dry hydrotherapy over other therapies is astounding. They love the way it makes them feel. Better reaction means higher retention and more positive word of mouth for you. Higher value is what keeps them asking for the therapy over and over again. No other therapy produces these kinds of requests for treatment. Imagine having your patients asking for a therapy over and over again. Imagine how many times they’ll come back because of it.
Once your order is placed, we will begin building your table. It will be built, tested and ready to ship in just a few days. Shipping time from our factory in Minnesota is between 1 and 5 days throughout the 48 contiguous states. All tables are shipped directly from our factory to you.
Call us at 800-330-7260 and we will find a customer near you so you can go there and try the tables.
The tables come in nine standard naugahyde vinyl colors: black, blue, green, teal, navy, burgundy, gray, tan, brown. View Color Choices
We have many more colors available if you need to match something in your business. There is an additional $200 charge for custom colors.
A reasonable limit is 30 to 45 minutes. Your body receives a great deal of benefit during 10 or 15 minutes so there is no need to stay on the tables for extended periods of time.
Our tables are the most affordably priced. They are the quietest, take up the least amount of space, require the least electricity and require the least maintenance.
Yes. All you need to do is reposition the patient on the table to get other areas of the body. Check out our positions for total body therapy page for more on this.
One year parts warranty for all customers located within the United States. We will send instructions with the parts and help guide you through the repair over the telephone. We have built the tables to be serviced by anyone that can use a screwdriver.
Discounts are negotiated at the time of ordering. It is common to offer some kind of financial benefit when more than one table is purchased. Just ask when you call.
We created a comprehensive marketing kit to help you make more money with your hydromassage table. Everything is available online and ready for you to print today.
Not if you use our Clar-Lub conditioner.
The water in the mattress never needs to be changed but because of evaporation, you will need to add water periodically. Adding water is easy. Simply pull back the cloth cover, unscrew the fill cap, remove the inner seal and add distilled water. You should remove any air from the mattress prior to replacing the fill cap. This can be done by sweeping your forearm across the water mattress, starting at the vinyl seat cushion and moving forward toward the fill spout. The air in the mattress won’t harm anything but will cause the table to be a little noisier than normal.
The maintenance is easy.
- Add a water conditioner called Clar-Lub every 3 months. The conditioner costs $9.95 plus postage. Learn more about the conditioner.
- Periodically add water as it evaporates through the microporous vinyl water mattress over time.
- Remove any air from the mattress. This can be done by sweeping your forearm across the water mattress, starting at the vinyl seat cushion and moving toward the fill spout. The air in the mattress won’t harm anything but will cause the table to be a little noisier than normal.
- Launder the water mattress covers and clean the upholstery with a cloth dipped into a warm water 10% soap solution (like dish soap).
Most repairs are easily done by the owner of the table but in case you need it, we have an extensive service network covering nearly all of the country. They know our product in detail and can help you with any of your needs.
The half body massage Pro S10:
73” length, 23” width and 23” height
The full body massage FB100 and FB200:
80” length, 34” width and 29” height
- You can remove the grab bar from the FB100 and FB200 making the table only 29″ wide which will easily move through most doorways.
Pro S10: 120 volt, 14 amps (requires a dedicated 20 amp outlet)
RejuvaWave FB100: 120 volt, 14 amps (requires a dedicated 20 amp outlet)
RejuvaWave FB200: 240 volt, 14 amps (requires a dedicated 20 amp outlet)
We have been manufacturing hydromassage tables since 1992.
We are located in Princeton, Minnesota (USA) which is about 45 miles north of Minneapolis/St Paul.
No. You must pay in full by check or credit card. If you need extended payments, we suggest either NCMIC or Paramount Financial Services as they have many affordable programs for you to choose from. They are financing companies. They will pay us in full and you will make payments to them.
All financing is provided by outside sources. We will work with any financing company you choose. We suggest either NCMIC or Paramount Financial Services as they have many affordable programs for you to choose from. They are financing companies. They will pay us in full and you will make payments to them.